Sweeping and mopping function
Xiaomi Mi robot vacuum cleaner 2 equipped with sweeping and mopping function. With the plant bionics system, its' filter can absorb water automatically and keep enough water content. Mop and water tank fit tightly, The mop cloth is as wide as the main brush. Sweeping first and then mopping, cleaning the floor effectively. And it is very convenient to install and remove the tank.
Automatic area cleaning function
This is another new function of Mi robot cleaner 2. Equipped with a high-precision LDS sensor which scans the room at 5 x 360 degrees per second, then Mi robot cleaner 2 uses its impressive SLAM algorithm to map the optimal cleaning path around a room, you can customize the cleaning location on the map via Mijia APP, after that, the vacuum robot will clean the location that you specified.
2000Pa powerful suction
The maximum suction of Mi robot cleaner 2 increased from 1800Pa to 2000Pa to improve cleaning efficiency. With the vacuum tornado cleaning system, the floats brush to fit the ground closely, coordinate the side brush and roll brush, clean the floor deeply. After opening this function on the Mijia APP it will automatically recognize the carpet, clean the carpet with its' maximum suction.
Omnidirectional pressure sensor
Xiaomi vacuum cleaner 2 equipped an omnidirectional pressure sensor above the LDS sensor. Its' role is to induce a slight collision and to prevent the vacuum cleaner into the low sofa. With this sensor, the robot is automatically avoided obstacles after the crash to protects the laser sensor.
5200mAh high-capacity battery
The vacuum 2 using the capacity 5200mAh lithium battery, it has about 2.5 hours of battery life in the standard mode. Maximum housing area about 250 square meters. When the power is low, it will also recharge and get on with the unfinished work. With the new infrared charging base which has 180 degree and 4m maximum range infrared coverage, the robot can charge back more accurate.
Powerful cleaning performance
Mi robot cleaner 2 optimizing its' wheel suspension system, the barrier height is increased from 1.5cm to 2.0cm. With E11 grade washable filter and there is waterproof Teflon substrate covered outside. It can maintain 95% filtration performance under the normal washing after one year. Using the anti-hair design to prevent the hair from entering the bearing stuck to the motor. Comes with closed silence cotton and porous air sieve, it will be quieter when it is working.
Mi robot cleaner 2 increased soft buffer crash to protect the furniture. With the wall sensor, this sensor makes the cleaner robot always keep a distance of about 10mm from the wall when it is working. With 4 cliff sensors to avoid falling. The double electronic compass identifies the virtual walls more accurate. Besides, Mi robot leaner 2 using a new infrared chargeback technology which makes the recharge more efficient.
APP remote control
The robot cleaner 2 also syncs with the Mijia APP, you can check the sweep status in real time and remote control the robot. In addition, you can set automatic schedules and customize the robot name and voice packets etc.
Mi robot cleaner
|Dimension & Weight||Producct Weight: about 3.5kg
Prodcut Dimension: 353 x 350 x 96.5 mm
|Package content||1 x Mi robot cleaner 2
1 x Charging Dock
1 x Power Cable
1 x Water Tank
1 x Mop
1 x Manual(English)